figgis (Proxmox host)
figgis is a dedicated server at OVH (Kimsufi KS-LE-5, Hillsboro, Oregon) running Proxmox VE 9. It hosts the new Lana and Cheryl as VMs, replacing their separate VPSes. Named for the agency both work for. In service since 2026-11-17.
Everything on it is set up by the playbook in
docker-infra/ansible,
from a fresh OVH Proxmox install to running VMs. Change the host by changing the playbook
and running it, not by hand; the
README
covers rebuilding, the roles, and the gotchas.
Hardware
Section titled “Hardware”- Xeon E5-1650 v4 (6 cores / 12 threads), 128 GB RAM.
- 2 × Intel DC P3520 450 GB NVMe (used datacenter drives; 25% and 39% of rated wear when
installed). OVH’s software RAID1 holds
/boot, the EFI partition and/(20 GB); the rest is a ZFS mirror, pooldata, about 384 GB usable,lz4compression. ZFS’s cache is capped at 16 GiB. - One 1 Gbps port in use (
eno1); the second isn’t cabled.
Network and access
Section titled “Network and access”| Public IP | 147.135.38.231 (host), 51.81.175.16 (additional IP, routed to Cheryl’s virtual MAC 02:00:00:1a:ac:a0) |
| Tailnet | figgis, 100.101.130.59, tag:figgis |
| Web UI | https://proxmox.taila2470a.ts.net (Tailscale Service), or https://figgis.taila2470a.ts.net:8006; tailnet only, Let’s Encrypt certificates from Tailscale |
| SSH | ssh figgis (root, keys only, tailnet only) |
- Login: the web UI’s default realm is authentik (OpenID Connect, passkey). If
Authentik is down, choose “Linux PAM” and log in as
rootwith its TOTP. - Firewall: Proxmox’s own. The public IP answers nothing but ping; SSH, the web UI and the
consoles are allowed from the tailnet only. Each VM has its own firewall too (inbound
DROP plus that VM’s
firewall_inrules), enforced on the host so nothing inside a VM can turn it off. A full TCP scan from outside on 2026-11-17 found no open ports. - Bridges:
vmbr0is the public bridge (VMs with an OVH additional IP sit here, using that IP’s virtual MAC).vmbr1is a private bridge,10.10.10.0/24, with NAT out through the host’s IP, for VMs that need no inbound public ports.
| VM | ID | Size | Network | Tailnet |
|---|---|---|---|---|
| lana | 101 | 4 vCPU, 16 GiB, 120 GiB | vmbr1, 10.10.10.10 (NAT) |
lana, tag:lana |
| cheryl | 102 | 8 vCPU, 48 GiB, 160 GiB | vmbr0, 51.81.175.16 |
cheryl, tag:cheryl |
Both are Ubuntu 26.04 from the cloud image, with Docker, Tailscale, automatic security
updates and a Dozzle agent (Lana runs Dozzle itself). SSH into them goes through figgis
(ssh lana, ssh cheryl). They took over from the old VPSes on 2026-11-17 (Cheryl) and
2026-11-18 (Lana); until 2026-11-18 they were called lana-new and cheryl-new.
Not set up yet
Section titled “Not set up yet”- Scheduled
vzdumpbackups of the VMs to somewhere off the box. - IPv6 for the VMs (the host has a single
/128).