Skip to content

Media stack

Everything is on Pam: Usenet downloads land in Pam’s media share, are moved into the library next to them, and Jellyfin serves them to the TV. Set up 2026-10-22 to 10-23 with Plex, which Jellyfin replaced on 2026-10-28. The downloaders ran on old Cheryl until 2026-11-17 and copied each import to Pam over SMB; they moved to Pam with that box’s retirement.

Prowlarr ──indexers──▶ Sonarr / Radarr ──grab──▶ SABnzbd (all on Pam, in Docker)
│ │ downloads + unpacks to /volume1/media/usenet
└──import (rename)───┘
▼
Pam: /volume1/media/{tv,movies} ──▶ Jellyfin (on Pam) ──▶ TV
Piece Where Compose Deployed by
SABnzbd, Sonarr, Radarr, Prowlarr Pam arr/ deploy-arr.yml, cat | ssh like jellyfin
Jellyfin Pam jellyfin/ deploy-jellyfin.yml, cat | ssh like garage

The READMEs in those two directories have the operational detail; this page is the map.

  • Downloading on Pam (since 2026-11-17): downloads and library share one disk, so an import is an instant rename and there’s no disk limit to speak of. The cost is that downloads use the home connection (~400 Mbit/s; SABnzbd is capped at half of it) and unpacking runs on Pam’s slow Atom CPU. Before that, downloads were on old Cheryl for its datacenter bandwidth, and its small shared disk is what the limits below were set for.
  • Library on Pam: terabytes free on RAID 6, at home next to the TV.
  • Jellyfin on Pam: next to the files. Pam’s Atom C2538 has no GPU and can’t transcode, so Jellyfin is direct play only. That works because playback is on a 4K TV app/streamer that decodes 4K HDR HEVC and AV1 itself. A client that can’t (a browser, the NUC for 10-bit HEVC) will fail rather than transcode.

Jellyfin’s web client is themed with the Lunar Outpost brand (Custom CSS kept in jellyfin/branding.css and deployed with it; edit it there, not in the dashboard). It reaches browsers and the web-based apps (LG/Samsung TV, Android phone, Jellyfin Media Player), not native apps such as Android TV or Swiftfin.

On the home LAN and the tailnet. The short names are Tailscale Services hosted by the Home Assistant box, which relays them to Pam over the LAN (Pam’s userspace Tailscale can’t host a Service); see Networking.

App Short name Direct Between containers
SABnzbd http://nzb/ http://pam:8085 http://sabnzbd:8080
Sonarr http://sonarr/ http://pam:8989 http://sonarr:8989
Radarr http://radarr/ http://pam:7878 http://radarr:7878
Prowlarr http://prowlarr/ http://pam:9696 http://prowlarr:9696
Jellyfin http://jellyfin/ http://192.168.1.16:8096 (LAN), http://100.109.83.48:8096 (tailnet)

The tailnet ACL has to let the device reach those ports; see Networking. Tagged devices aren’t covered by an autogroup:member rule (the Mac is tag:external-vpn, which needed its own rule).

  • Prowlarr holds the indexers and pushes them to Sonarr and Radarr (full sync): NZBFinder, and AnimeTosho (Usenet) for anime. AnimeTosho’s Prowlarr preset still points at feed.animetosho.org, which no longer resolves; it’s set to https://feed.animetosho.net.
  • Sonarr and Radarr use SABnzbd as download client (categories tv / movies, remove completed and failed downloads after import) and import to /data/tv and /data/movies. Pam’s whole media share is /data in every container (/data/media/* before the move to Pam; the databases were rewritten).
  • Usenet provider: usenetserver, configured in SABnzbd.
  • All of this was configured through the apps’ APIs and lives in each app’s database under /volume1/docker/arr/config on Pam, not in docker-infra.

Custom formats and profiles (identical names in Sonarr and Radarr where they apply):

Custom format Matches Scores
Not English release has no English (an untagged release counts as the title’s original language) −10000
Foreign Language any non-English language tag (German.DL, MULTi with a tag) −100 (−10000 in anime)
Upscaled Upscaled, AI.Upscale, Regrade, … in the name −10000
English Dub (Sonarr) Dual Audio, DUAL, Dubbed, ENG DUB, EN+JA +1000 in anime
Efficient Codec x265, HEVC, AV1 +50 (tie-breaker)
Profile App Allows Min / cutoff score Use for
HD + Native 4K both 1080p (WEB, Blu-ray), then 2160p (WEB, Blu-ray); no remuxes −1000 / 0 movies; TV only when 4K is worth it
HD-1080p (English) Sonarr 1080p only; 2160p ranked above it but not allowed, so existing 4K files are kept −1000 / 0 default for TV
Anime (English Dub) Sonarr SD → 720p → 1080p, no 4K 1000 / 1000 anime, with Series Type: Anime

The anime profile can’t use “Not English”: for anime an untagged or dual-audio release counts as Japanese, so it would reject every dub. It requires a dub marker instead and rejects other explicit language tags. The stock profiles (Any, HD-1080p, …) have none of these rules and shouldn’t be picked.

Files that meet a profile’s quality and score cutoff are left alone while still monitored; unmonitor (or move to a lower profile) only to freeze something below cutoff.

These date from when downloads were on old Cheryl’s small shared disk; they still apply on Pam but haven’t been revisited. There, every download was written and unpacked on that disk before being copied to Pam, so a release needed roughly twice its size free. On 2026-10-23 a 4K Friends upgrade queued 591 GB including 60 to 90 GB season packs, filled the disk to SABnzbd’s floor and stalled everything. Since then:

  • Maximum release size: 20 GB in Sonarr, 25 GB in Radarr (Settings → Indexers).
  • Size per minute (quality definitions): 1080p WEB 95, 1080p Blu-ray 100, 2160p 170 MB/min. About 11 GB for a 1080p film, 20 GB for 4K.
  • SABnzbd pauses below 20 GB free (download_free), and runs par2/unrar at nice -n 19 and ionice -c2 -n7. Download speed on Pam is capped at 50% of 50 MB/s (about 200 Mbit/s, half the home line). In practice it has paused at about 30 GB free (seen 2026-11-02), above that floor. Since 2026-11-02 fulldisk_autoresume is on, so it restarts by itself once imports to Pam free the space; before that a pause lasted until someone pressed resume.
  • An upgrade Sonarr grabs but then refuses to import (e.g. “Not a Custom Format upgrade”) stays in complete/ holding space. Remove it from Activity → Queue with “Remove from Download Client”; 25 Friends episodes held 28.5 GB this way on 2026-11-02.
  • A season pack Sonarr matched “by ID” won’t import automatically (“importBlocked”); it sits in usenet/complete until manually imported (Activity → Queue, or the manualimport API).

The four arr images (ghcr.io/linuxserver/*, not lscr.io, whose tags the agent can’t list) are reported by the update agent but, since the move to Pam, not applied: it can’t reach Pam’s Docker, so they’re updated by bumping the pin and pushing, like Jellyfin. Each app’s SQLite database is in /volume1/docker/arr/config and isn’t dumped first. Jellyfin (jellyfin/jellyfin, the official image: linuxserver’s lags behind Jellyfin 12 and its tags don’t parse) is report-only (review): the agent can’t reach Pam, so it’s updated by bumping the pin and pushing.

Not set up. DirecTV (satellite or Stream) can’t feed Jellyfin: there’s no tuner for it and the streams are DRM-protected. Options noted: an HDHomeRun with an antenna for local channels in Jellyfin’s Live TV (MPEG-2 1080i, which the TV must direct play), or Channels DVR with a DirecTV Stream login, outside Jellyfin.

  • Streaming away from home isn’t set up (nothing forwarded on the UDR7; Jellyfin has no relay).
  • Nothing backs up /volume1/docker/arr/config or /volume1/docker/jellyfin/config beyond Pam’s RAID.
  • Plex’s old config is still in /volume1/docker/plex on Pam (44 MB), in case it’s wanted back.
  • Only two indexers; old anime dubs (Digimon 1999) are mostly missing from both.